-
We have fitted quite a few of these choke control units - often with AMAL...
Inc VAT
-
The pitch on these nuts is fine to match the fine pitch of the cable adjuster
Inc VAT
-
Standard fit fine pitch thread adjuster screw.
Inc VAT
-
Nice clean gaskets all round to stop the precious fuel escaping!
Inc VAT
-
Carburetor clamp bolts like this crop up on pretty much all Lambretta and...
Inc VAT
-
This four sided ethnol proof float needle fits pretty much all applications...
Inc VAT
-
Prevent air leaks and carburetor movement with a new nylon mounting sleeve.
Inc VAT
-
Rod and G model have an unusual throttle cable end that is a pig to find - we...
Inc VAT
-
This type of seal is very common and are prone to failing! creating fuel...
Inc VAT
-
Genuine NOS main jet - nice!
Inc VAT
-
Standard jet 106 for TV175 - or to up-jet your carb!
Inc VAT
-
Inc VAT
-
110 main jet - for when you need more fuel!
Inc VAT
-
Inc VAT
-
Inc VAT
-
Inc VAT
-
Inc VAT
-
Inc VAT
-
Inlet manifolds wear so avoid sucking air and replace when necessary
Inc VAT
-
Inlet manifolds can wear - especially 22mm versions - don't get sucking air!
Inc VAT
-
Inc VAT
-
Inc VAT
-
Inc VAT
-
We find this slide along with 5899-2 atomiser the best for most non standard...
Inc VAT
-
Inc VAT
-
The dellorto SH carburettors as found on all series 3 machines seem to run...
Inc VAT
-
German made high quality washable high flow air filter.
Inc VAT
-
Inc VAT
-
worn slides cause air leaks and poor running - fit one of these for an...
Inc VAT
-
If you have a late production Lambretta your choke unit may be working...
Inc VAT